Manufactured by URIMAT Schweiz AG
URIMAT ceramic C2
Item no. 12401
- Current manufacturer range
- Available through our Canadian supply partner
A compact white ceramic bowl for smaller washrooms, with URIMAT's membrane trap and the NRV 2.0 non-return valve.
Available through our Canadian supply partner. Contact FlowSave Commercial for current stock, model options and a custom quotation. Equipment and installation are quoted individually.
Specifications
URIMAT's published specifications, checked 28 October 2026. We confirm the exact configuration with your quotation.
- Manufacturer
- URIMAT Schweiz AG
- Range
- ceramic
- Item numbers
- 12401
- Material
- Non-porous sanitary ceramic
- Finishes
- white
- Dimensions (W × D × H)
- 335 × 315 × 640 mm
- Weight
- 19.7 kg
- Drain outlet
- Ø 50 mm, rear outlet, connection bend included
- Odour trap
- MB-ActiveTrap ceramic with NRV 2.0 (replacement packs 52202 / 52206)
- Non-return valve (NRV)
- Yes
- Display
- None
- Power supply
- Not required
- Cleaning system
- standard
- Mounting
- Direct wall mounting with bracket 58.401; Kera-Fix 58.520 in-wall frame
Features
Typical commercial applications
Applications are FlowSave guidance based on material and features, not manufacturer claims.
Technology and maintenance
- Odour trapThis model uses MB-ActiveTrap ceramic with NRV 2.0 (replacement packs 52202 / 52206). URIMAT's membrane trap opens under flow and closes when the flow stops. Its integrated cleaning block limits deposits, and an indicator under the clear cover shows when the trap needs replacing.
- Trap replacementURIMAT gives an average trap life of 7,000 to 8,000 uses, so replacement frequency follows traffic. The non-return valve keeps the drain closed while the trap is changed.
- CleaningRoutine bowl cleaning with a compatible cleaner; URIMAT recommends its pH-neutral MB-ActiveCleaner. Ask the supplier which products to avoid.
- Drain carePeriodic drain-line checks and rinsing, because urine sludge can collect without flush water.
Installation and retrofit
- Drain connectionØ 50 mm outlet (rear outlet, connection bend included). Adapting it to existing Canadian drain-pipe sizes is confirmed on site by your plumber.
- MountingDirect wall mounting with bracket 58.401; Kera-Fix 58.520 in-wall frame.
- Existing drainsURIMAT's installation instructions call for existing drain pipes to be professionally cleaned when water-flushed urinals are replaced, and drains must not slope backwards.
- PermitsApproval rests with the local authority having jurisdiction; your plumber should confirm requirements with the municipality before work starts.
Technical documents
URIMAT publishes these documents for this model. Ask for any of them and we'll follow up with your enquiry.
- Assembly instructions URIMAT ceramic C2 NRV (item 12401)Installation manualRequest this document
- Tender text ceramicC2 urinal (item 12401)Tender / specification textRequest this document
- Assembly instructions Kera-Fix in-wall frame 58.520Installation manualRequest this document
- URIMAT product brochure 2026 (EN, rev. 03, 10.02.2026)BrochureRequest this document
- Cleaning instructions, URIMAT urinals (89.002, pictograms)Cleaning and trap-replacement instructionsRequest this document
- Replacement instructions, MB-ActiveTrap NRV 2.0 (89.007, pictograms)Cleaning and trap-replacement instructionsRequest this document
- Safety data sheet, MB-ActiveCube (GB, v11.0)Safety data sheetRequest this document
- Safety data sheet, MB-ActiveCleaner (GB, v10.0)Safety data sheetRequest this document
Enquire about the URIMAT ceramic C2
Your enquiry goes to FlowSave Commercial and is recorded against this model. We check current stock, model options and lead time with our Canadian supply partner and send you a custom quotation.